Kingston upon Thames, London KT2 6QW [email protected]

Fire safety compliance in Greenwich

Fire safety compliance in Greenwich, London

Lian Construction carries out fire safety compliance works for London landlords, letting agents and block managers, turning fire risk assessment action plans into completed, documented works. Rather than leaving you to source separate contractors for fire doors, fire-stopping, emergency lighting and alarm work, we price the whole action plan as one job and deliver it as a coordinated programme. Each completed item is photographed against the corresponding entry in the assessment, giving you a clear record for the assessor, freeholder or fire authority.

Greenwich overview

Fire safety compliance in Greenwich

A large stock of Victorian and Edwardian houses with essentially no dedicated roofing competitor coverage. Greenwich falls well within the South East London ground Lian Construction covers on a regular basis. For fire safety compliance work in Greenwich, that local knowledge means fewer surprises once work is on site and a team that already understands the borough's typical property stock.

Greenwich has a large stock of Victorian and Edwardian houses, much of it terraced or semi-detached, built in the decades either side of 1900 as London's suburbs expanded along the riverside and rail lines. As with similar housing across inner and near-inner London boroughs, roofs on these properties are typically slate or clay tile, often with parapet walls, valley gutters, and multiple original chimney stacks. Many houses will have had partial re-roofing, loft conversions, or rear extensions at some point over the past century, which means roof coverings and detailing are frequently mixed ages even on a single property. Bay windows with their own small roofs, and shared or party-wall guttering between terraced neighbours, are common features that need particular care during repair work. Given the age of this housing stock, issues such as slipped or missing tiles, ageing lead flashing around chimneys, and worn valley gutters are the kind of thing homeowners in Greenwich are likely to encounter periodically, rather than one-off problems. Property condition varies a good deal street by street depending on maintenance history, so what one house needs can differ significantly from its neighbour.

With a large stock of Victorian and Edwardian houses and essentially no dedicated roofing competitor coverage in the area, homeowners and landlords in Greenwich are often left choosing between general builders who treat roofing as a sideline, or firms based further afield who may not prioritise smaller local jobs. This gap tends to show up most clearly with urgent repairs, where a slipped tile or a leak after a storm needs someone who can attend quickly rather than fit the job in around larger contracts elsewhere. It also affects planning and quoting for larger work such as full re-roofs or chimney repairs, where a lack of specialist local knowledge can mean longer lead times or less accurate initial assessments. For landlords managing older rental stock, this matters because roof issues left unresolved tend to escalate into damp and interior damage, which is more disruptive and costly to fix than catching problems early. Homeowners undertaking wider refurbishment work, such as loft conversions or extensions, may also find it harder to coordinate roofing specifically as part of a bigger project if there isn't a contractor locally who covers that trade in depth. In practice, this means demand for reliable, responsive roofing and refurbishment work in Greenwich likely outstrips the readily available supply.

Given the concentration of Victorian and Edwardian houses in Greenwich, conservation area and, in some cases, listed building considerations are worth checking before starting roofing or exterior refurbishment work. As in many outer and inner London boroughs with older housing stock, parts of Greenwich may fall within conservation areas, where changes visible from the street, such as replacing roof coverings with a different material, altering rooflines, or adding roof windows to a front elevation, can require planning permission even where similar work elsewhere would be permitted development. Chimney stacks and original architectural detailing are often specifically protected in these areas. It's worth checking with the local planning department or a surveyor early on, since retrospective permission is harder to secure than getting it sorted before work starts. This doesn't apply to every property, and plenty of routine repairs and like-for-like replacements fall outside these controls, but it's a sensible thing to verify given the age of the housing stock.

Compartmentation and fire-stopping

We reinstate compartment lines that have been broken by service penetrations, missing ceiling sections or altered layouts, using appropriate fire-stopping materials.

Fire doors and means of escape

Fire doors are usually the biggest single item on an FRA action plan for converted flats and HMOs, and they are also the item most likely to fail a follow-up inspection if fitted badly. A fire door only performs to its rating as part of a complete door set: the leaf, frame, intumescent strips, cold smoke seals, hinges and self-closer all have to be matched and fitted correctly, with gaps around the frame kept to roughly 3mm at the head and sides and no more than 8-10mm under the door. On a lot of London conversions the original door leaf has been re-hung, planed down or fitted with a cheap closer at some point, so it looks like a fire door without performing as one. Where a door just needs new intumescent and smoke seals, a compliant closer or ironmongery, we repair rather than replace it, quicker and less disruptive to a tenant. Where the leaf itself isn't fire-rated or the frame has been altered, we fit a certificated FD30 or FD30s door set sized to the opening, with vision panels and signage where the assessment specifies them. We also check that final exit doors and escape routes stay clear and that self-closing devices on communal doors haven't been wedged open, which is a common finding in shared houses.

Fire risk assessment action plans delivered end to end
Compartmentation and fire-stopping works
Suitable for occupied HMOs and rented blocks
Regular coverage of Greenwich and the wider South East London area

Signs to look for

Do you need fire safety compliance in Greenwich?

  • Emergency lighting in the stairwell or corridor doesn't come on when you test it by cutting the power.
  • A riser cupboard door is missing, damaged or propped open, exposing service pipework that should sit behind a fire-rated enclosure.
  • Bikes, bins or storage boxes are routinely left in the communal hallway or stairwell, blocking the escape route.
  • A previous loft conversion or knock-through was carried out without reinstating the compartment line above or around it.

How the work is handled in Greenwich

  1. Step 1Review the FRA action plan
  2. Step 2Price each action item clearly
  3. Step 3Carry out the remedial works
  4. Step 4Document and photograph completed items

Questions

Fire safety compliance questions in Greenwich

How quickly can Lian start fire safety compliance work in Greenwich?

Greenwich is part of our regular South East London coverage, so once we've surveyed the property we can usually confirm a start date quickly. Send the address and scope and we'll arrange the next step.

Do you cover all of Greenwich?

Yes. Greenwich falls within the area Lian Construction serves across Greater London.

How do you fire-stop a service penetration through a compartment wall or floor?

We use appropriate fire-stopping materials and methods matched to the penetration, such as intumescent collars around pipework or fire-rated sealant around cabling, so the compartment line is properly reinstated rather than just packed with general filler.

Do you supply and fit fire doors that meet current regulations, or just install what we already have?

We supply and fit FD30 and FD30s fire doors as certificated door sets, complete with intumescent strips, cold smoke seals and compliant self-closers, rather than adapting standard doors on site. Where the FRA specifies a fire-rated door for a flat entrance or cupboard, we match the set to that rating and fit it with the correct ironmongery and signage. If existing doors just need seals, closers or vision panel repairs to bring them up to standard, we can do that instead of a full replacement, which is usually cheaper and less disruptive for tenants already living behind them.

How much does a typical fire safety compliance programme cost?

It varies a lot with the size of the FRA action plan, the number of fire doors involved and whether scaffold or extensive fire-stopping to service risers is needed. A short list of six or seven items in a converted Victorian house might run to a few thousand pounds, while a full communal upgrade across a block of flats, with door sets, compartmentation and emergency lighting, costs considerably more. We price the action plan line by line so you can see what each item costs before deciding whether to proceed with all of it at once or stage the works over a few visits.

Do we need building control sign-off for this kind of work?

Some items, such as replacing fire doors or altering compartment walls, fall under Part B of the Building Regulations, and whether building control needs to be involved depends on the scope and whether the work is notifiable. We can flag where an item is likely to need building control or a competent person scheme certificate and factor that into the programme, though confirming which works are notifiable ultimately depends on the specific building and falls to the client or their agent to establish.

Talk to Lian Construction about Greenwich

Send the site address in Greenwich, photos if available, and the fire safety compliance work you need. We can review the scope and arrange the next step.

Email UsGet A Free Quote