Stratford regeneration continues to drive refurbishment and repair demand across converted and new-build stock alike. Newham falls well within the East London ground Lian Construction covers on a regular basis. For brickwork and repointing work in Newham, that local knowledge means fewer surprises once work is on site and a team that already understands the borough's typical property stock.
Newham's housing stock is a mix of eras rather than one dominant type. Older neighbourhoods away from the Stratford core still have Victorian and Edwardian terraces, along with inter-war and post-war housing, much of it converted into flats over the decades. Around Stratford itself, the picture is different: large-scale new-build apartment blocks have gone up since the Olympic regeneration began, alongside conversions of older industrial and commercial buildings into residential use. This mix means work in the borough spans everything from traditional repair and repointing on period terraces to snagging and remedial work on newer builds, plus the specific issues that come with converting non-residential buildings into homes. For a contractor, this variety matters: a Victorian terrace and a five-year-old conversion flat fail in different ways and need different approaches. Owners and landlords in Newham are as likely to be dealing with settlement cracks in a new block as damp in an old one, so it helps to work with a contractor who isn't only set up for one type of property.
The continued regeneration around Stratford has kept refurbishment and repair demand high across Newham, and that demand isn't limited to new-build. Converted properties, some created during earlier waves of development, are now old enough to need attention themselves, while newer stock often surfaces defects and snagging issues in the first few years. For homeowners and landlords, this means the borough has a steady flow of work but also a busy trade, and finding a contractor with availability can take longer than in quieter areas. Landlords managing flats in converted or new-build blocks tend to deal with a narrower set of recurring issues, plasterwork, minor leaks, finishing snags, while owner-occupiers in older terraces further from the centre are more likely to need broader repair or refurbishment work. Given how much building activity the regeneration has brought to the area, it's worth getting quotes early and being clear about timescales, since demand can affect how quickly work gets scheduled. Property type also affects who you need: not every firm working in Newham is equally comfortable across period terraces and modern conversions.
Chimney stacks, garden walls and brick cleaning
Chimney stacks take the worst weather exposure of almost any brickwork on a London house, standing above the roofline with no protection and full exposure to wind-driven rain, and they're frequently the first place repointing failure and brick spalling show up. We repoint and repair stack brickwork, renew flaunching, the mortar fillet around the base of the chimney pots that sheds water away from the stack top, and rebuild sections where brick has deteriorated too far to repair in place, coordinating scaffold access with any roofing work happening at the same time where relevant. Garden and boundary walls are built to the same standard as house brickwork but usually weather faster, since they have no roof overhang for protection and often sit closer to ground moisture and vegetation than a house elevation does, and a garden wall showing bulging or leaning, rather than just failed pointing, needs assessing for its footing condition before any repointing is worthwhile. Brick cleaning removes paint, staining, algae or general dirt from a facade, and method matters as much as the result: soft-washing with a low-pressure water and appropriate cleaning solution lifts dirt and biological growth without damaging the brick face, while sandblasting or aggressive high-pressure cleaning strips away the harder, weathered outer surface of an older brick permanently, leaving it more porous and vulnerable to future frost damage. We avoid sandblasting on historic brickwork for this reason and would flag it as a risk to the fabric of the building rather than recommend it, even where it looks like the faster option.
Lime mortar vs cement mortar: why it matters
The single most important decision in repointing London's older brick stock is mortar type, and it's also the one most likely to be got wrong by someone unfamiliar with period buildings. Victorian and Edwardian houses were built with a soft lime mortar, typically a hydraulic lime such as NHL 3.5 mixed with sand, which is deliberately weaker than the brick itself. That's intentional: lime mortar is porous and slightly flexible, so it allows the wall to breathe and lets any moisture that gets in evaporate back out through the joints rather than through the brick face, and it also acts as a sacrificial layer, wearing and needing renewal over time rather than the brick itself taking the damage. Repointing with a hard, dense cement mortar, common practice for decades before the issue was well understood, reverses this relationship. Cement mortar is stronger and less permeable than the surrounding brick, so moisture that gets into the wall can no longer escape through the joints and instead gets forced through the brick face itself, which is significantly more vulnerable to frost damage than the mortar was ever meant to be. Over years, this shows up as spalling, brick faces cracking and flaking off as trapped moisture freezes and expands within the brick. Once a wall has been repointed in cement, reversing the damage means raking out the hard pointing, which is itself a slow, careful job to avoid damaging brick arrises in the process, and repointing again in an appropriate lime mix. Joint profile matters as much as mix ratio for both appearance and performance. Original Victorian pointing was often a simple flush or slightly recessed joint rather than the raised, ruled joint sometimes applied in later repointing work, and matching the original profile as well as the mortar colour keeps a repointed wall looking consistent with the untouched sections either side of it. We take a sample of sound original mortar where one exists, checking it against the new mix before repointing a visible elevation, rather than guessing at a shade that turns out to look patchy once it's dried and weathered in. We specify lime mortar as standard on solid-wall Victorian and Edwardian brickwork, matched in colour and joint profile to the original.